Your HIFI Equipment Buy & Sell Paradise In Malaysia, Totally free of charges 马来西亚音响的买卖天地!
Monday, 24 February 2014
Van Den Hul The First Ultimate Interconnects 1.0m
Selling 1 Pair VDH The First Ultimate in very good condition came with original Box, Manual.
The FIRST Ultimate
Interconnect Cable The FIRST ® Ultimate is a threefold heavier shielded version of our highly praised classic The FIRST ® (world’s first METAL FREE interlink) and has been designed for highest quality (unbalanced / asymmetric) line level audio and SPDIF digital audio connections. With The FIRST ® Ultimate the sonic results are so different and also so much better than found with any metal product we know of, that we think this is a complete breakthrough in cable technology. Besides the many highly innovative technical aspects of this product, its sonic aspects are even more attractive: Especially the lack of dynamic compression on higher signal levels, the extended low level information and the total lack of any harshness make this cable so different from any other product known so far. And for critical listeners with high demands on spatial reproduction, this is your final choice; no other product so far produced, renders so much spatial information as The FIRST ® Ultimate. The basic conductor material is Linear Structured Carbon ® (LSC). The coaxial constructed The FIRST ® Ultimate has a LSC centre conductor with 12,000 individually insulated 7 micron strands with a total diameter of 1 mm. The individual strand insulation prevents electrons to cross from fibre to fibre. The direct result is that electrons exclusively move trough the 7 micron strands in one dimension. Side movements are virtually impossible. This prevents a lot of audio problems. Sonic result: a much cleaner sound reproduction. The center core insulation is made of polyethylene foam to achieve a low capacitance between the inner and outer group with minimal dielectric absorption. In difference to our The FIRST ®, The FIRST ® Ultimate’s outer braiding, functioning as screen and signal return, is made of 6 (instead of 2) layers of braided LSC fibres. Together 114,000 individually insulated fibres. The jacket is made of light yellow coloured HULLIFLEX ® 4 with black type printing. HULLIFLEX ® 4 provides a superb mechanical protection and exhibits a very high chemical stability. The result of all this innovative work is a product without any defects. Thus far in any combination of equipment, the improvements were very clearly detectable, and this not just for experienced listeners. The FIRST ® Ultimate performs equipment independently. All owners will be really happy with their sound reproduction for the first time in their life. Also as a digital interlink, The FIRST ® Ultimate performs unsurpassed. The typical interface induced jitter-distortion is definitively finished. You will remember the day and hour of your first listening to The FIRST ® Ultimate. Why is The FIRST ® Ultimate equipped with a heavier shield? With our classic The FIRST ® connecting to some brands of tube amplifiers in very rare occasions a slight background hum is audible. This weak hum is caused by excessive ground currents flowing through the (unbalanced) cable’s resistive shield, adding up to the audio signal. The FIRST ® Ultimate’s heavier shield exhibits a much reduced electrical series resistance, thus minimizing the risk of experiencing hum problems. What are these so called “ground currents”? Due to the fact that most audio equipment in your installation is powered by the mains voltage, an unavoidable hum voltage residual is induced on all cabinets and audio grounds. At all audio devices these residual voltages are of different magnitude (or phase) and will balance out by means of ground currents flowing through the shields of your interconnecting cables. Generally, these ground currents are in the same order of magnitude as the audio signal currents being transferred (microAmperes); When using unbalanced interconnects they are likely to interfere, thereby reducing transparency and imaging. What can be done? With the Van Den Hul POLARITY CHECKER, you can simply fine-tune your audio system to eliminate, or at least strongly reduce, these residual ground currents and thus improve your system’s performance. The external diameter of The FIRST ® Ultimate is 7.8 mm., perfectly matching our C - 8.0 RCA type connector. Available: 0.6, 0.8 and 1.0 meter, single packed (for digital audio interface applications (SPDIF)) and stereo pair packed with our RCA type connectors.
Asking : RM1000-Neo!
FREE SHIPPING IN MALAYSIA
Please call +6016 800 8896 for more information.
thank you
Thursday, 20 February 2014
WESTERN ELECTRIC 274B ORIGINAL DATE CODE: 439
Selling very rare in local preowner market Western Electric 274B rectifier tube date code: 439 the best rectifier tube ever made!
Was tested close on Hickock tube tester . Min 40- (52/50)
SOLD!
Please call +60 16 800 8896 for more information.
Thank You!
Thursday, 13 February 2014
Zu Wax Speakers Cable 3Meter-SOLD!
Selling 1Pair Zu Wax 3Meter - Spade Speakers Cable, came with full set original box, plastic shielding and manual.
Asking SOLD!
Please call +60168008896 for more information.
PS Audio Ultimate Outlet-SOLD!
Selling 1 unit PsAudio Ultimate Outlet, good condition.
SOLD!
Shipping : Free shipping into Malaysia.
Description: Power-line conditioner.
Dimensions: 5" W by 3 1/8" H by 7½" D. Weights: Standard model, 3 lbs; High Current model, 4 lbs.
Please call: +6016 800 8896 for more information.
Thank you
Wednesday, 12 February 2014
Thursday, 23 January 2014
Goldring-Lenco GL59 turntable SOLD
Goldring-Lenco GL59 turntable in excellent working condition. Made in Switzerland. C/W original tonearm, new solid wood plinth and new acrylic dust cover. Imported from the UK.Cartridge not included. Turntable looks very clean and upgraded with IEC power input and RCA signal output. Turntable runs very quiet and sounds very musical.
Condition : 7.5/10
Location : Ipoh
Asking price : SOLD
Please contact Alan 016-5576846
Monday, 20 January 2014
PHILIPS TDA 1541A S2 DOUBLE CROWN D/A
Selling 1pc Philips TDA1541A S2 Double Crown D/A ( used ) most analog 16bit D/A chip ever.
Asking : RM1600.00
Please call 016 800 8896 for more infomation.
Thank You
Sunday, 19 January 2014
Shunt mono 48steps attenuator-100k ( Pair)
Thursday, 26 December 2013
ALTEC MONOBLOCK 1590E POWER AMP-SOLD!
DESCRIPTION
The ALTEC 1590E Power Amplifier is designed for applications where uninterrupted operation is a requisite. The 1590E provides 200 watts of power at less than 1% total harmonic distortion (THD) from 50 Hz to 12 kHz, and has a frequency response of ±1 dB from 20 Hz to 20 kHz at one watt output. Output transformer taps provide connections for 70.7-, 100-, 140- and 200-volt line distribution systems.
The 1590E features silicon solid-state circuitry, a switchable high-pass filter for use in speech systems, input connections for high-impedance
devices and for
150/600-ohm or 15,000-ohm balanced inputs, fail-safe protection for
output transistors, and a hinged front panel for rapid access to the
chassis interior.The ALTEC 1590E Power Amplifier is designed for applications where uninterrupted operation is a requisite. The 1590E provides 200 watts of power at less than 1% total harmonic distortion (THD) from 50 Hz to 12 kHz, and has a frequency response of ±1 dB from 20 Hz to 20 kHz at one watt output. Output transformer taps provide connections for 70.7-, 100-, 140- and 200-volt line distribution systems.
The 1590E features silicon solid-state circuitry, a switchable high-pass filter for use in speech systems, input connections for high-impedance
The 1590E is capable of operation from a 120V or 240V ac source or a negative grounded 28V dc source. The 1590E is UL listed for use in commercial audio systems and fire protective signaling systems.
Designed for rack-mounted use, the 1590E occupies six units of vertical space (10 1/2").
SOLD!Please call 016 800 8896 for more information
thank you
Tuesday, 24 December 2013
Audio Note LEXUS 42 strand high purity copper Litz interconnect cable 1.5m
Selling Audio Note LEXUS RCA Interconnect cables, 42 Strand High Purity Copper Litz Interconnect, 1.5m, terminated with Audio Note AN-P Silver RCA plugs by factory. All in very good condition and original box
Asking RM1,400.00 including shipping - Price Neo!
Please call +60168008896 for more information.
thank you
Wednesday, 11 December 2013
Music infinity MC01 mini tube amplifier (Used)
Music infinity mini tube amplifier
Model : MC01
Power output : 35 watt
Condition : 8/10
Made : china
Price : rm 780 nego
Contact : loy 0163683523
Monday, 2 December 2013
Mackie SWA1801 Active Subwoofer System
MACKIE SWA1801
Picking up where our SWA1501 leaves off, the Mackie
SWA1801 ups the ante with even more wattage and a bigger 18" transducer.
The SWA1801 features an internal 800-Watt FR (Fast Recovery) Series
amplifier and a high-precision 18" transducer custom designed for
optimal performance with the amp and enclosure. Onboard Mackie Active
electronics ensure seamless integration of the amplifier and transducer
at all times, creating a system that is highly efficient and versatile.
Add it all up and this high-output system will peel the paint right off
the walls!
For high-output loudspeakers, real wood just sounds
better—and it looks better, too! The SWA1801 enclosure is made of select
15mm Baltic birch plywood and finished in black splatter paint.
Carrying handles are integrated into each side for easy loading, and
casters are attached to the rear for transport. Since you will probably
want the full-range enclosure nearby, a pole mount receptacle is
strategically placed on top of the enclosure.
Item is Made In:USA
User Manual can be found via :http://www.mackie.com/pdf/swa1801_ss.pdf
Item Condition :Display Unit (Mint)
Price :RM 2800 (negotiable)
Interested Buyers can call or email us at :012-3333895/ multitrade.mte@gmail.com

Accurate, Earth-Shaking Bass Enhancement.
TRUE MACKIE ACTIVE DESIGN
Active doesn't just mean the SWA1801 has an amplifier bolted on its back — it means optimized electronics that provide complete control and maximum performance over all components. The onboard Active system controls the crossover filters, equalization, protection for the transducer and electronics, and provides real time vigilance over the entire system. There is simply no way that you can get this kind of full system functionality by strapping an amp on the back of a passive speaker box.
Active doesn't just mean the SWA1801 has an amplifier bolted on its back — it means optimized electronics that provide complete control and maximum performance over all components. The onboard Active system controls the crossover filters, equalization, protection for the transducer and electronics, and provides real time vigilance over the entire system. There is simply no way that you can get this kind of full system functionality by strapping an amp on the back of a passive speaker box.
NO NEED FOR AN EXTERNAL CROSSOVER 
Connecting and setting up the SWA1801 is a breeze. It accepts a stereo or mono line-level signal via female XLR input jacks. Male XLR Thru jacks are provided for daisy-chaining the signal to additional SWA1801 cabinets. The built-in crossover routes the high frequency content to the high-pass output jacks, which can be used to feed the inputs of full-range Active speakers, such as those in the Mackie SAz Series, or an amplifier powering a pair of passive speakers. A Subwoofer Level control lets you adjust the balance between the subwoofer and the full-range speakers.
Connecting and setting up the SWA1801 is a breeze. It accepts a stereo or mono line-level signal via female XLR input jacks. Male XLR Thru jacks are provided for daisy-chaining the signal to additional SWA1801 cabinets. The built-in crossover routes the high frequency content to the high-pass output jacks, which can be used to feed the inputs of full-range Active speakers, such as those in the Mackie SAz Series, or an amplifier powering a pair of passive speakers. A Subwoofer Level control lets you adjust the balance between the subwoofer and the full-range speakers.
THE SECRET TO OUR POWER
The SWA1801's built-in amplifier, which produces 800 watts continuous power, sits on a massive heatsink, eliminating the need for fans and dramatically extending life expectancy. A tremendous benefit of having the amplifier inside the subwoofer enclosure is that the SWA1801 functions as a complete system, optimizing acoustic, electronic, and mechanical designs to achieve the highest level of performance and value.
SOLID WOOD CONSTRUCTION The SWA1801's built-in amplifier, which produces 800 watts continuous power, sits on a massive heatsink, eliminating the need for fans and dramatically extending life expectancy. A tremendous benefit of having the amplifier inside the subwoofer enclosure is that the SWA1801 functions as a complete system, optimizing acoustic, electronic, and mechanical designs to achieve the highest level of performance and value.
Item is Made In:USA
User Manual can be found via :http://www.mackie.com/pdf/swa1801_ss.pdf
Item Condition :Display Unit (Mint)
Price :RM 2800 (negotiable)
Interested Buyers can call or email us at :012-3333895/ multitrade.mte@gmail.com
Bang & Olufsen (B&O) Model ST/P 12" tonearm ( Sold )
Bang & Olufsen (B&O) Model ST/P 12" tonearm. Made in Denmark. New Old Stock and New In Box. C/W original box and original B & O cartridge and manual. This tonearm is very rare and hard to find in this condition.
Condition : 8.5/10
Asking price : SOLD
Please contact Alan : 016-5576846
Rega planar 3 with solid wood plinth ( Sold )
Rega planar 3 upgraded with acrylic platter and 50mm thick solid Chenggal Mas wood plinth. C/W used Rega RB300 tonearm and new acrylic dust cover. Very good sounding turntable and very beautiful built quality. Cartridge not included.
Condition : 8.5/10
Asking price : SOLD
Please contact Alan 016-5576846
Subscribe to:
Posts (Atom)


